Sample Banner
Sample Resume > Engineering Sample Resume > Mechanical Engineering Resume

Mechanical Engineering Resume

 

Contact information

Braun S.Kunstatter

 12 Street
Boston

 Massachusetts

Career objective

Looking for a challenging position of the Mechanical Engineering Resume the reputed University with a view to use my wide experience for the benefit of the organization.

I strive for precision and excellence at all times using my analytical, design, field, engineering, computer, human relations and managerial skills and experience to enhance the productivity of any organization that offers me employment. 

WORK EXPERIENCE
A. ACERGY   LIMITED. Nov. 2009 –June 2010
Position Engineer (Construction) Internship
1. Directly supervise and communicate with different engineering discipline sub-contractors on the progress of projects. 
2. Involved in the punching and closing out operation of a tie-in spool onshore construction work.
3. Participates as a member of project engineer’s team writing work procedures and progress reports on different projects.
4. Prepares Permit to Work on different construction works like hot tapping, working at height and mechanicalhandling.
B. CAKASA EPIC OIL AND GAS SERVICES NIGERIA LIMITED Sept. 2007- Oct.2008
Position: Project / Field Engineer.
RESPONSIBILITIES: 
1. Pipeline laying and pump mounting on flowlines and general site construction supervision.
2. Design new products from conception, redesign existing ones, develop and install or modify existing equipment for new purposes. Proper data management using access data base management.
3. Prepare purchase orders and prepare products specifications for clients with proper invoicing.
4. Strict adherence to standard working flow with proper safety and health measures in the site.
5. Ensures quality of project in cognizance with the ISO 9001 procedures and writing work procedures.
6. Makes sure that schedules are prepared each day and milestones achieved with resource management.
7. Study drawings and generate bill of materials (BOM) required for pipe erection, fabrication and piping works.
8. Reviewing design and preparation of material for project milestone take off and HAZOP analysis.
9. Project monitoring and evaluation with proper report as regards progress of the projects assigned to.
10. Bid, Bill of quantities, Invitation to tender preparation, tender preparations for both commercial and technical pre-qualifications requirements.
11. Supervise and co-ordinate daily activities of the welders, fitters, grinders and other artisans required for fabrication works. Drafting work flows on day to day activities in the site.
12. Ensure that proper procedure and industry standard like API 650 are followed in tank erection, equipment installation like pumps, valves etc.
13. Supervise the entire test required to ascertain quality work like Non Destructive Testing (NDT), Hydro test, and Radiography. 
14. Using Microsoft project software and Primavera to set milestones, schedules and monitor project progress.
PROJECTS INVOLVED IN ARE AS FOLLOWS
1. Nafgas Liquidified Petroleum Gas (LPG) turnkey Spherical tank project 2008.
2. First Deep Water Turnkey Project 2008.
B. OBAFEMI AWOLOWO UNIVERSITY ILE IFE, NIGERIA Oct. 2006- Sept. 2007
Position: Graduate Assistant Lecturer 
RESPONSIBILITIES:
1. Lecturing of tutorial and non-tutorial courses (Engineering Drawing and Mathematics).
2. Marking scripts and posting of examination scores in the computer. 

WORK RELATED HANDS ON EXPERIENCE SOFTWARE SKILLS
Microsoft suite of Office (Ms Word, Ms Excel, Ms Power Point and Ms Project), MATLAB, MathCAD, AUTOCAD and INVENTOR for 2-D and 3-D works, PIPESIM, FLEXCOM (Riser Design and Analysis), Failure Mode Effects, Critical and Analysis FMECA, ANSYS for FEA.

CERTIFICATIONS
Universal Basic Offshore Safety Induction and Emergency Training, (HUET), (BOSIET), UK. valid till 2014.
Universal Offshore Medical Certificate with Log Book. (Dutch, Norwegian and UK.) valid till 2013. 
Offshore Oil and Gas Minimum Industry Safety Training., (MIST) valid till 2014 
Course Modules Include: Risk Assessment, Permit to Work, COSHH Assessment, Mechanical Handling, Manual Handling, Working at Height and Asset Integrity.
NEBOSH General National Certificate, UK. 2010.
Proficiency Certificate in Management, (Chartered) 2007.

PROFESSIONAL MEMBERSHIPS 
1. Society of Petroleum Engineers (SPE) ( (contact details removed))
2. Institute of Mechanical Engineers Associate Member. (AMImeche)
3. Energy Institute Member (EI)
4. Associate Member Institute of Marine Engineering, Science and Technology. (AMIMarEST)
5. Society of Underwater Technology SUT (30961).

ACHIEVEMENTS TO DATE
1. Best and Innovative Final Year Project Award 2006.
2. Federal Government of Nigeria Undergraduate Scholarship 2002
3. Best Science Students Award in Senior Secondary. 1999 

POSITIONS OF LEADERSHIP HELD TO DATE
1. Senior School Science Laboratory Prefect 1998.
2. Chairman Directorate of Welfare Students Union Government 2003.

EDUCATIONAL BACKGROUND
University of  Scotland, United Kingdom. 2010.
 College, Scotland, United Kingdom. 2009.
Nnamdi Azikiwe University, Anambra State, Nigeria. 2006.

EDUCATIONAL QUALIFICATIONS
Master of Science in Subsea Engineering, (MSc) 2010.
Course Modules: Project Management of onshore and offshore oil and gas projects. Subsea Drilling and WellEngineering with drilling completions equipments identification and specifications. Subsea Networks / SystemEngineering, Flow Assurance, Subsea Controls and Design Engineering, Risers, Moorings and HydrodynamicsEngineering, Subsea Pipelines and Soil Mechanics Engineering, Subsea Installations and Integrity, Subsea Construction, Inspection and Maintenance.
PROJECT TOPIC: Subsea Designing for RISER SYSTEM, Reliability, Operability and Integrity Management.

PROJECTS ACCOMPLISHED TO DATE ON THE COURSE
1. Using MATLAB software to generate a programme, simulate graphs and perform matrix calculations for determining the Touch Down Point (TDP) on a J and S Lay pipeline respectively .(A Subsea 7 Project, 2010). 
2. Risers Design, Mooring and Advanced Hydrodynamics: Using FLEXCOM software to configure, generate a model for the configurations of 4 and 10 inches risers, establish their initial hang-off from the FPSO, with their sag bend and hog bend elevations, also using the pipe datasheet to determine the Damaging Pull, Burst Pressure and Bending Strain. (An MCS EPIC Project 2010)
3. Using MathCAD to model 2 * 2 matrices of umbilical cables and transformers, and then multiplying them to provide an expression representing the complete network.
4. Design of a Subsea Pipeline Transporting Condensate from a satellite Platform to a processing plant on the Topside in the North Sea using PIPESIM software to develop the compositional model of the hydrocarbon phases, adding aqueous phase to the compositional model and identification of the Hydrate envelope. Considering industry codes like API, ISO, DNV and BS 8010 (A Schlumberger Project, 2009).
5. Design specification of a subsea control system with the Bill of Materials (BOM), using INVENTOR software, with analysis on the installation of PLEM, PLET, Manifolds, Wellheads, Umbilical, Flowlines and Risers. (An Aker Solutions Project, 2009).
6. Design and Sizing of a Subsea Hydraulic Power Unit and Umbilical in a return Reservoir of a subsea field. (An Aker Solutions Project 2009). 
Higher National Certificate (HNC in Computer Aided Design and Drafting) DISTINCTION 2009
Course Modules: AutoCAD 2-D, X-Referencing, Detail Design Layout, Design Modification in 2-D and 3-D respectively. 3-D Modelling, Rendering, Visualisation and Presentation, 3-D CADD for manufacture, 2-D and 3-D Piping, Structural,Mechanical and Electrical equipments with (P and ID).Communication practical design skills using Microsoft excel, Power points and Access Data Base. INVENTOR software packages. Link for my final project animated: ( http://www.youtube.com/user/bonakristus.) done with BS 8888 drawing office standard.

PROJECTS ON THE COURSE
1. Modification of Prototype offshore platforms. Design of some rotary mechanical parts like piston and sleeve with gear mechanisms and different Mechanical and Electrical equipments using INVENTOR
First Degree (B.Eng.), Mechanical Engineering 2006
Second Class Honours, (Upper Division), 2.1
Some Course Modules: Fluid Mechanics, Thermodynamics, Mechanical Engineering Design, Energy Conversion,Engineering Metallurgy, Mechanics of Materials, Mechanics of Machines, Human Factor Engineering, Automatic Control Systems, Engineering Ergonomics, Work Study and Job Evaluation, Engineering Drawing, Production Planning and Control and Metrology and Operations Research, Energy Conversion. Air conditioning and Refrigeration.
 

References

Braun S. Kunstatter
Manager
Wap Company.
Braun_Kunstatter@gmail.com